Hello, welcome to visit Oufu Optoelectronics,We are a Chinese fiber optic cable manufacturer
whatsapp:+86 13904053308
Home > News > Product knowledge > more

Contact us

Oufu Optical Fiber Cable Co.,Ltd

Address: Shenyang, Liaoning, China
Contact person: Manager Zhang
Phone: 400-964-1314
Mobile phone: +86 13904053308   
                    【whatsapp && wechat】

Product knowledge

Fiber Cable Types: Best Pull Premade Assemblies for LAN?

2025-05-29 257

Choosing the right pull premade fiber cable assemblies for your LAN can boost network performance by up to 40%. With the global pre-terminated fiber market growing at 7.8% CAGR (Market Research Future 2025), making informed decisions is crucial. This guide reveals professional insights from real-world installations.


1. Why Premade Fiber Assemblies Dominate LAN Deployments

The Time vs. Performance Equation

Pull premade fiber cable assemblies solve three major LAN challenges:

  • Eliminate messy field terminations

  • Reduce installation time by 65%

  • Ensure consistent optical performance

During our 2025 university campus project, pre-terminated OM4 cables saved 120 labor hours compared to field splicing.

LSI Keywords: connector endface inspection, cable pulling tension, bend insensitive fiber


2. LAN-Specific Fiber Types Compared

TypeOM3 MultimodeOM4 MultimodeOS2 SinglemodeMax Speed10G @ 300m100G @ 150m400G @ 40kmCost/m$1.20$1.80$3.50Best UseServer roomsData centersCampus links

Warning: Don't mix fiber types! Mismatched cores cause 15-20dB loss.


3. The 5-Step Selection Process

  1. Calculate Your Distance

    • Under 100m: OM3/OM4

    • Over 500m: OS2

  2. Determine Bandwidth Needs

    • 1G Ethernet: OM1 works

    • 40G+ : OM4 minimum

  3. Choose Connector Type

    • LC for high density

    • SC for general use

  4. Select Jacket Materialwww.adsscable.cn

    • Riser-rated for vertical runs

    • Plenum for air handling spaces

  5. Verify Testing Standards

    • Look for IEC 61300-3-35 compliance


4. Installation Pro Tips

Problem: Cable snags during pulls
Solution: Use bend-insensitive fibers with 7.5mm minimum radius

www.adsscable.cn

Problem: Connector contamination
Fix: Implement dust cap protocol (we lost 3 days to dirty connectors in 2024)

Problem: Signal loss
Diagnosis: 89% of cases stem from improper pulling tension (Fiber Optic Association 2024)www.adsscable.cn


5. Future-Proofing Your LAN

  • Multimode Evolution: OM5 enables wavelength division

  • Smaller Connectors: CS vs. LC for ultra-high density

  • Smart Cables: Embedded sensors monitor bend/stress


LAN Fiber Checklist

✅ Confirmed fiber type matches equipment
✅ Verified connector polish type (UPC/APC)
✅ Calculated proper slack length (+10%)
✅ Scheduled post-installation OTDR test
✅ Labeled all termination points